DetentionGRADE™ Products
7700 Double Rib Bar System
Description
This Maximum Security 7/8" Double Rib Bar System are used where inmates have to be visible to the corrections staff and the staff has to be secure from the inmates. The vertical ASTM-1045 double-rib bars are heat treatable to ASTM-627 (see specifications below). The horizontal A36 flat bars are not heat treatable.
This system is custom designed to fit the area where it is required. The vertical double-rib bars are interlocked to the interior horizontal flat bars to create a secure system. The Maximum Security T/R Cell Bar System is installed from engineered doors, panels and mounts. The Door Locking System is usually a DetentionGRADE™ Door Device (quoted separate...see Door Devices above) with supervised access from a Central Control Room.
Specifications:
Vertical Bar Material: ASTM-1045 7/8" Double Rib Jail Bar
Vertical Bar spacing: Available on 4", 5" & 6" Centerlines
T/R Heat Treat: ASTM-627 Is available on Double Rib bar only
Horizontal Flats: A-36 3/8 x 2 1/4" steel
Door Pulls: Raised SSTL Pull see Hardware & Locks above
Hinged Doors: 2ea. #5-Prison Hinges see Hardware & Locks above
Paint: PC-Primer/Gray ready for paint
End Users
State Correctional Facilities
County Jails
City Police Stations
Federal Correctional Facilities
Border Patrol Stations
Installation
Installlation Drawings: Engineered installation drawings are included for each area where the product is to be installed
Pre-Installation Proceedure: The mounting surface shall be secure and rigid. All areas where the closure angles are to be mounted need to be free of surface obstacals that would impair a tight secure installation
Installation Proceedure: Use only qualified Journeyman Installers for the installation proceedure. Layout and install the vertical columns, mullions and closure angles per the installation drawings supplied true and plumb. Fit and install the fixed panels and doors per the installation drawings supplied. When all panels and doors are measured and tested proceed with the final field welding to the closure angles and closure plates. Clean and dress any exposed welds prior to paint touchup
Final Finish: It is the OWNERS responsiblity for the paint type, color and application